36 training courses found
This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods.
Day 1 of the Industrial Electrical Maintenance Part 1 consists of: Electricity at Work Regulations 1989, requirements and implementation Working safely, including the importance of isolation procedures and lock out systems Switches and Push Buttons, an explanation of the various types of switches and push buttons, the terminology and electrical symbols which are used in industry today, along with practical testing of functionality Relays and Contactors, principles of operation, purpose and uses Circuit design using BS electrical symbols and ladder diagrams, simple retaining circuits Construction of the above circuit, demonstrating the techniques of cable termination. Day 2 of the Industrial Electrical Maintenance Part 1 consists of: 3 phase induction motors, synchronous and asynchronous Description of the component parts of a 3 phase induction motor Demonstration of how a 3 phase rotating magnetic field is produced and how to reverse it Explanation of synchronous and asynchronous speed and slip Effect of the number of poles on motor speed Frame sizes Practical identification of various motors.
Level 3 EAL – Industrial Electrical Maintenance City & Guilds – Fundamental Electrical Principles and Practices for Industrial Practices Lev
Level 3 EAL – Industrial Electrical Maintenance City & Guilds – Fundamental Electrical Principles and Practices for Industrial Practices City & Guilds 2392 – Fundamental Inspection & Testing City & guilds 2394 – Initial Verification The TIEM15 has an identical first10 days to the TIEM10, but additionally includes City & Guilds 2392 & City & Guilds 2394.
Level 3 EAL – Industrial Electrical Maintenance City & Guilds – Fundamental Electrical Principles and Practices for Industrial Practices City & Guilds 2382-1517th Edition Wiring Regulations The TIEM13 has the same first 10 days as the TIEM10, and additionally includes 17th Edition Wiring Regulations.
Day 1 Solenoids and actuators, principles of operation and maintenance State precautions that may be necessary when removing cores from energised AC solenoids Transformers, sizing, applications and uses Heaters, applications, uses and safety precautions to be observed Temperature controllers, various types, principles of operation and uses Thermal sensors, various types, principles of operation and uses. Day 2 Proximity devices, limit switches and proximity switches, various types, principles of operation and uses Practical workshop, gaining an understanding of typical connections of various proximity devices and the range of available supplies catered for, voltage levels and current type Development of a typical simple control system using push buttons, proximity devices, relays and indicator lamps.
This City and Guilds 2377-22 course is a one or two day ‘practical’ workshop aimed at anyone involved in the inspection and testing of portable electrical equipment, covering everything necessary to successfully achieve the City and Guilds 2377-22 level 3 examination, with certification awarded to successful candidates. The City and Guilds 2377-22 course includes both a theory element and a practical element.
Sufficient skills, knowledge and techniques to install, pressure test, leak test, evacuate, dehydrate and commission typical air-conditioning units in accordance with the regulations and industry good practice. Also you will gain the ability to be able to maintain, install and repair refrigeration plant.
*Please Note* First two weeks of training course must be completed at Chesterfield centre.
This two day Fire Alarms BS 5839 course is based upon BS 5839:1, BS 5839:6 Fire alarm systems are essential for the safety of life and/or property. In general, it is appropriate to install some form of fire alarm system in virtually all buildings, except very small relatively open planned buildings.
This Electrical Installer Course is designed for people wishing to upgrade their existing skills to be able to offer customers further services. The course is aimed at tradesmen like plumbers, kitchen fitters, bathroom installers, etc who no longer want to pay an electrician to add sockets, move existing systems or add an extra light switch etc.
The 10 day level 3 course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course.
This Domestic electrical installation course is designed for people wishing to upgrade their existing skills to be able to offer customers further services.
17th edition course is a 3 day short course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognised ‘must have’ qualification for companies seeking to recruit electricians. the 17th edition course is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties.
City & Guilds – Fundamental Electrical Principles (MOD1) City & Guilds – Electrical Installation Practices for Domestic Dwellings (MOD2) Cit
City & Guilds 2392 - Level 2 City & Guilds 2382-1517th Edition City & Guilds 2393 Building Regulations City & Guilds 2377-22 PAT Testing
This short City and Guilds 2393-10 course is to enable those involved in the installation of electrical systems within the domestic environment to gain an understanding of how electrical installations in dwellings must comply with all relevant Building Regulations and how electrical installations in dwellings can affect the building construction. Please note that this City and Guilds 2393-10 qualification is only suitable for those practising their trade in England and Wales due to their being different regulations in Scotland and Northern Ireland.
CITB J11 renewal – 1 Day £220 + VAT The 1 Day F-Gas renewal course covers changes to the original F Gas Regulation which came in to effect in January 2015. It is aimed at those who have primarily continued to work in the Air Conditioning and Refrigeration industry since initially achieving their F Gas Certificate.
Level 3 EAL – Programmable Logic Controllers City & Guilds – Programmable Logic Controllers City & Guilds – 2394 Initial Verification City & Guilds – 2395 Periodic Inspection The 15 Day PLC course adds City & Guilds 2394 & 2395 Combined Inspection & Testing to the Programmable Logic Controllers 10 day course. The electrical part of the course is designed for those with limited electrical experience.
A one or two day ‘practical’ City Guilds 2377-22 workshop aimed at anyone involved in the inspection and testing of portable electrical equipment, covering everything necessary to successfully achieve the City and Guilds Level 3 examination, with certification awarded to successful candidates. The City Guilds 2377-22 course includes both a theory element and a practical element.