Find training courses on Training and Courses.com
> UK

PROCAT Training Courses

56 training courses found

CompEx EX05-EX06 Combustible Dust in Essex
Audience aimed at: Corporate training only

CompEx Ex05-Ex06 is a 3-day course specifically designed to provide underpinning knowledge and practical assessment of electrical and mechanical personnel who undertake the physical installation and assembly of new ‘EX’ equipment and/or who perform preventative maintenance and inspection on previously installed equipment in potentially explosive atmospheres due to dust. Staff attending this course often work in potentially explosive environments such as: On and off-shore oil and gas installations Petrochemical plants Petrol forecourt environments Mills and other dust generating environments Amongst other things the course covers: General principles, sources of ignition and apparatus protection for dust environments Standards, Certification and marking including ATEX directives ATEX95, ATEX137, DSEARS ATEX categories 1, 2 & 3 and EPL’s Da, Db & Dc Protection concepts for dust Area classification for dust atmospheres IIIA, IIIB and IIIC Combined (hybrid) methods of protection Wiring systems, enclosure entries, cable glanding and earthing to BS 60079-14 Inspection and maintenance to BS EN 60079-17 Practical examples, dust chamber testing.

  • Study level: Advanced
  • Duration of training: 3 days
  • Study mode: Full time
CompEx Foundation in Essex
Audience aimed at: Corporate training only

The CompEx Foundation 2-day course is a specialised training programme aimed at Technical Assistants, Supervisors, Contract Managers and Senior Management. This is a nationally recognised qualification offering underpinning knowledge.

  • Study level: Not applicable
  • Duration of training: 2 days
  • Study mode: Full time
CCNSG Safety Passport in Essex
Audience aimed at: Corporate training only

Aim The CCNSG Safety Passport is a 2-day training course designed to ensure all personnel seeking employment on a construction site have a basic knowledge of Health and Safety and therefore, after an appropriate site induction, are able to work safely and with reduced risk to themselves and others. Course Content Amongst other things the course covers: Understanding basic health and safety requirements Identifying common hazards and risks on-site that may affect themselves and others Taking suitable actions and precautions to avoid any identified hazards and risks; also to report such incidents Assessment A two day course consisting of four sessions (2 per day).

  • Study level: Not applicable
  • Duration of training: 2 days
  • Study mode: Full time
CCNSG Safety Passport Renewal in Essex
Audience aimed at: Corporate training only

Aim The CCNSG Safety Passport Renewal is a 1-day refresher course and exam for those needing to renew their CCNSG Safety Passport. Course Content Amongst other things the course covers: Understanding basic health and safety requirements and up-dates to regulations Identifying common hazards and risks on-site that may affect themselves and others Taking suitable actions and precautions to avoid any identified hazards and risks; also to report such incidents Assessment A one day course consisting of three sessions.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
NEBOSH National General Certificate in Essex
Audience aimed at: Corporate training only

The NEBOSH National General Certificate is for Managers, Supervisors and staff from all types of organisations who need a wide understanding of Health and Safety issues in order to be able to manage risks effectively. It can form a first step towards a career in health and safety or further professional study.

  • Study level: Not applicable
  • Duration of training: 15 days
  • Study mode: Part time day
CMI L5 Award in Management and Leadership in Essex - Practices of Resource Management
Audience aimed at: Corporate training only

This 2-day Level 5 Award is a concise qualification designed to give learners a good knowledge of the various roles, functions and responsibilities as a middle manager of a department and the limits of their authority and accountability. Practices of Resource Management Understanding planning processes and different types of resources Cost control Procurement and managing suppliers Dealing with supply problems Monitoring the use of supplies All training will be workshop based, participative and relevant to the organisation.

  • Study level: Advanced
  • Duration of training: 2 days
  • Study mode: Full time
City & Guilds 2394/2395 Level 3 Awards in the Initial Verification, Periodic Inspection, Testing and Certification of Electrical Installations in Essex
Audience aimed at: Corporate training only

Our C&G 2394/95 is a combination course of two, now separate qualifications. This very intensive course is designed to enable learners to understand the principles, practices and legislation for the initial verification, periodic inspection, testing and condition reporting of electrical installations.

  • Study level: Advanced
  • Duration of training: 6 days
  • Study mode: Full time
City & Guilds 2365 Level 2 Diploma in Electrical Installations in Essex
Audience aimed at: Corporate training only

The C&G 2365 Diploma provides delegates with the essential underpinning knowledge required to work in the electrical industry. The course is the first step on the path of becoming a qualified electrician and is suitable for newcomers as well as for those with some industry experience.

  • Study level: Beginner
  • Duration of training: 1 year
  • Study mode: Part time evening
Mechanical Craft – Module 2 - Centre Lathe Turning in Essex On Demand
Audience aimed at: Corporate training only

This 5-day course provides delegates with an opportunity to gain the skills and knowledge needed to safely carry out a range of tasks involving centre lathes, including tool grinding and machining procedures. The course is aimed at those working in or needing a refresher in mechanical manufacturing environments.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Customised
Part-66 Category B1.1 Licence in Essex
Audience aimed at: Corporate training only

The Part-66 Category B1.1 Licence is an important part of reliable and trustworthy aircraft maintenance, repair and overhaul operations (MRO).

  • Study level: Not applicable
  • Duration of training: 81 days
  • Study mode: Part time day
BPEC Vented and Unvented Hot Water Systems in Essex
Audience aimed at: Corporate training only

This 2-day course is a legal requirement for any heating engineer or plumber looking to fit unvented hot water systems above 15lt capacity. By undertaking this training, you no longer need to contact your local Building Control Officer to approve your work.

  • Study level: Not applicable
  • Duration of training: 2 days
  • Study mode: Customised
C&G 2079 F-Gas and ODS Regulations in Essex
Audience aimed at: Corporate training only

The aim of this qualification is to provide you with the knowledge and skills to work on the installation, service, maintenance, recovery and leak checking of stationary refrigeration, air conditioning and heat pump equipment that contains refrigerants classified as either fluorinated (F) gases or ozone depleting substances (ODS). This qualification is for refrigeration, air-conditioning and heat pump system engineers working with fluorinated gas and ozone depleting substances.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Full time
BPEC Water Supply (Water Fittings) Regulations 1999 in Essex
Audience aimed at: Corporate training only

The aim of this 1-day distance learning and college based combination course is to allow plumbers to update their knowledge of this important legislation used in controlling the installation and use of water supply and water fittings. The course covers the following: Introduction, background and legislation The water regulations Materials and substances in contact with water Requirements for water fittings Water system design Installation commissioning Cross connections Back flow prevention Cold water services Hot water services WCs and urinals Sanitary appliances and water for outside use This course is scheduled on demand, please call to discuss your requirements.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
Advanced Programming of Programmable Logic Controllers (PLC) in Essex - On Demand
Audience aimed at: Corporate training only

Progressing from the introductory programming course, this 3-day course takes the programming techniques and understanding to a more advanced level. This will include using complex functions of the PLC.

  • Study level: Advanced
  • Duration of training: 3 days
  • Study mode: Full time
City & Guilds 2357-44 Level 3 NVQ in Electrical Installations in Essex
Audience aimed at: Corporate training only

The C&G 2357- 44 NVQ Level 3 in Electrical Installations is aimed at people wishing to work as qualified electricians in the building services engineering sector and who have access to adequate working practice in electrical installations. Together with the C&G Level 32365 Diploma in Electrical Installations it makes you into a fully competent electrician.

  • Study level: Intermediate
  • Duration of training: 1.5 years
  • Study mode: Part time
IOSH Managing Safely in Essex
Audience aimed at: Corporate training only

This IOSH Managing Safely course is for Managers, Supervisors, Team Leaders and those with Health and Safety responsibilities such as Health and Safety advisers and Committee Members. This 4-day course is a high impact, interactive course designed to enable individuals with a Health and Safety responsibility to develop, and keep up to date with, the practical actions required to handle health and safety in their teams.

  • Study level: Not applicable
  • Duration of training: 4 days
  • Study mode: Full time
City & Guilds 2377-22 Level 3 Award in the In-Service Inspection and Testing of Electrical Equipment (PAT) in Essex
Audience aimed at: Corporate training only

This PAT Testing course is aimed at those undertaking practical inspection and testing of electrical equipment. It allows candidates to learn, develop and practise skills required to test portable electrical appliances with the Code of Practice for In-Service Inspection and Testing of Electrical Equipment.

  • Study level: Intermediate
  • Duration of training: 2 days
  • Study mode: Full time
Mechanical Craft – Module 3 – Vertical Milling in Essex On Demand
Audience aimed at: Corporate training only

This course provides delegates with an opportunity to gain the skills and knowledge needed to safely carry out a range of milling operations in line with company requirements. The course is aimed at those working in or needing a refresher in mechanical manufacturing environments.

  • Study level: Intermediate
  • Duration of training: 5 days
  • Study mode: Full time
CCNSG Leading a Team Safely in Essex
Audience aimed at: Corporate training only

The CCNSG Leading a Team Safely is a one day workshop designed to provide an essential introduction to supervising/managing small teams within the context of Health and Safety across industries involving engineering and construction. Amongst other things the course covers: Methods of successful communication How to lead a team successfully Achieving safe outcomes within a team How to work safely with others It explores these topics in an interactive way and delegates’ participation throughout the day is a key factor.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
Forklift Truck Driving for Novices On-Site
Audience aimed at: Corporate training only

Aim Our Fork Lift Truck Driving for Novices course is aimed at ensuring that drivers handling Fork Lift Trucks are competent to do so and able to pass the tests required by the RTITB. The course is delivered on-site, making use of your own equipment.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Customised
Next