Find training courses on Training and Courses.com
> UK

PLT TRAINING LTD

PLT Training Ltd. is a NEBOSH, ITSSAR, RTITB, IOSH, CIEH and Qualsafe accredited training provider based in Wolverhampton, West Midlands offering professional Forklift, Overhead Crane, Manual Handling, First Aid and Health and Safety Training courses throughout the UK.

Our services are fully mobile which means all of our training courses can take place at your own premises to keep your operator travelling expenses to a minimum.

Alternatively, you may wish to come to our outstanding training centre which caters for Counterbalance and Reach Trucks or our purpose built classrooms based in Wolverhampton.

Our Trainers have both instructor certificates and teaching qualifications, which means we are able to write and deliver bespoke courses just for you or adapt an off-the-shelf course to suit your organisation.

If after searching you can’t find the course that suits you or your company, please do not hesitate to contact us to discuss what PLT Training can do for you.

  • Cancellation policy

PLT Training Ltd training courses

25 training courses found

Counterbalance Forklift
Audience aimed at: Corporate training only

FORKLIFT TRAINING COURSES - RTITB, ITSSAR, Inhouse Here at PLT, we understand the real world and will not compromise on standards or practical training when it comes to giving your staff the best knowledge to help them do their job in an efficient and safe manner. Please click on the course of your choice below: Counterbalance - PLT Training Center and offsite Reach Truck - PLT Training Center and offsite Pivot Steer - PLT Training Center and offsite Pedestrian Pallet Truck - Offsite Vehicle Mounted Lift (Moffett) - Offsite Multidirectional (4 Way) - Offsite Very Narrow Aisle Lift Truck (Man down/Man up) - Offsite Container Handler - Offsite Side Loader - Offsite Telescopic Handler - Offsite Rough Terrain - Offsite Pedestrian Pallet Stacker - Offsite Order Picker (Low and High) - Offsite Our services are fully mobile which means all of our training courses can take place at your own premises to keep your operator travelling expenses to a minimum.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Full time
Overhead Crane Course - Offsite
Audience aimed at: Corporate training only

Overhead Crane Course - to be delivered at your site COURSE OVERVIEW This training will allow the employee to carry out routine inspections of the machinery/lifting tackle and recognise the causes of load instability. They will also be able to operate the crane using safe and correct procedures in accordance with the manufacturer’s instructions and good practice.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
Reach Forklift
Audience aimed at: Corporate training only

FORKLIFT TRAINING COURSES - RTITB, ITSSAR, Inhouse Here at PLT, we understand the real world and will not compromise on standards or practical training when it comes to giving your staff the best knowledge to help them do their job in an efficient and safe manner. Please click on the course of your choice below: Counterbalance - PLT Training Center and offsite Reach Truck - PLT Training Center and offsite Pivot Steer - PLT Training Center and offsite Pedestrian Pallet Truck - Offsite Vehicle Mounted Lift (Moffett) - Offsite Multidirectional (4 Way) - Offsite Very Narrow Aisle Lift Truck (Man down/Man up) - Offsite Container Handler - Offsite Side Loader - Offsite Telescopic Handler - Offsite Rough Terrain - Offsite Pedestrian Pallet Stacker - Offsite Order Picker (Low and High) - Offsite Our services are fully mobile which means all of our training courses can take place at your own premises to keep your operator travelling expenses to a minimum.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Full time
Pivot Steer Forklift
Audience aimed at: Corporate training only

FORKLIFT TRAINING COURSES - RTITB, ITSSAR, Inhouse Here at PLT, we understand the real world and will not compromise on standards or practical training when it comes to giving your staff the best knowledge to help them do their job in an efficient and safe manner. Please click on the course of your choice below: Counterbalance - PLT Training Center and offsite Reach Truck - PLT Training Center and offsite Pivot Steer - PLT Training Center and offsite Pedestrian Pallet Truck - Offsite Vehicle Mounted Lift (Moffett) - Offsite Multidirectional (4 Way) - Offsite Very Narrow Aisle Lift Truck (Man down/Man up) - Offsite Container Handler - Offsite Side Loader - Offsite Telescopic Handler - Offsite Rough Terrain - Offsite Pedestrian Pallet Stacker - Offsite Order Picker (Low and High) - Offsite Our services are fully mobile which means all of our training courses can take place at your own premises to keep your operator travelling expenses to a minimum.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Full time
Counterbalance Forklift
Audience aimed at: Corporate training only

FORKLIFT TRAINING COURSES - RTITB, ITSSAR, Inhouse Here at PLT, we understand the real world and will not compromise on standards or practical training when it comes to giving your staff the best knowledge to help them do their job in an efficient and safe manner. Please click on the course of your choice below: Counterbalance - PLT Training Center and offsite Reach Truck - PLT Training Center and offsite Pivot Steer - PLT Training Center and offsite Pedestrian Pallet Truck - Offsite Vehicle Mounted Lift (Moffett) - Offsite Multidirectional (4 Way) - Offsite Very Narrow Aisle Lift Truck (Man down/Man up) - Offsite Container Handler - Offsite Side Loader - Offsite Telescopic Handler - Offsite Rough Terrain - Offsite Pedestrian Pallet Stacker - Offsite Order Picker (Low and High) - Offsite Our services are fully mobile which means all of our training courses can take place at your own premises to keep your operator travelling expenses to a minimum.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Full time
360° EXCAVATOR - NPORS
Audience aimed at: Corporate training only

COURSE OVERVIEW This course is designed to train and assess candidates in the safe operation of 360° Excavators, including how to safely and proficiently manoeuvre, drive and position the machine. On successful completion of the course, candidates will be able to understand current relevant legislation, identify hazards and the precautions needed to overcome them and will be able to operate safely and proficiently with minimum risk of injury and/or damage to equipment and property.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
NEBOSH GENERAL CERTIFICATE
Audience aimed at: Corporate training only

COURSE OVERVIEW The NEBOSH General Certificate is held by more people in the UK than any other health and safety qualification. Designed to help Managers, Supervisors and other members of staff effectively manage risks as well as giving them a broad understanding of health and safety.

  • Study level: Intermediate
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
360° EXCAVATOR - ITSSAR, RTITB, Inhouse
Audience aimed at: Corporate training only

COURSE OVERVIEW This course is designed to train and assess candidates in the safe operation of 360° Excavators, including how to safely and proficiently manoeuvre, drive and position the machine. On successful completion of the course, candidates will be able to understand current relevant legislation, identify hazards and the precautions needed to overcome them and will be able to operate safely and proficiently with minimum risk of injury and/or damage to equipment and property.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
PORTABLE APPLIANCE TESTING (PAT)

COURSE OVERVIEW The Regulations place responsibility on employers with regard to electrical safety. About a quarter of all reportable electrical accidents involve portable apparatus.

  • Duration of training: 0.5 hours
  • Study mode: Full time
180˚ Excavator - NPORS
Audience aimed at: Corporate training only

COURSE OVERVIEW This course is designed to train and assess delegates in the safe operation of 180° Excavators, including how to safely and proficiently manoeuvre, drive and position the machine. On successful completion of this course, delegates will be able to understand current relevant legislation, identify hazards and the precautions needed to overcome them and will be able to operate safely and proficiently with minimum risk of injury and/or damage to equipment and property.

  • Study level: Multiple levels
  • Duration of training: 1 day
  • Study mode: Full time
Abrasive Wheels
Audience aimed at: Corporate training only

COURSE OVERVIEW This course is designed and structured to provide training in the safe use of abrasive wheels and meets with the requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER 98) and the Health and Safety Executive HSG 17 “Safety in the Use of Abrasive wheels”. In relation to abrasive wheels, PUWER 98 requires, among other things, that all machinery is suitable for its intended use and is properly maintained, and that employees, including those using, mounting and managing the operation of abrasive wheels, are fully informed and properly trained in their safe use.

  • Study level: Not applicable
  • Duration of training: 5 hours
  • Study mode: Full time
First Aid at Work
Audience aimed at: Corporate training only

COURSE OVERVIEW This 3 day course is designed for those who wish to become an appointed First Aider within their company. Delegates will be able: - To provide help and give safe, prompt and effective First Aid to a casualty in the workplace following an injury or illness - To act safely, promptly and effectively with emergencies at work - To be familiar with the types and uses of first aid equipment - To gain an appreciation the duties of employers and the legal framework - Be familiar with records keeping and management issues in connection with an emergency - For course members to recognize the importance of personal hygiene in first aid procedures COURSE CONTENT The following will be covered: Emergency response Resuscitation (CPR) Breathing Disorder Managing an accident Transportation of victim The unconscious casualty The wounded or bleeding casualty Treatment of burns & scalds Treatment of injury to bones & joints Treatment of shock Treatment of eye injuries Treatment for poisonings Treatment of those overcome by gas or fumes Recognition & action for major/minor illness Personal hygiene Use of First Aid equipment On successful completion, delegates will receive an accredited Qualsafe or (EFR) Emergency First Response certificate, valid for 3 years.

  • Study level: Not applicable
  • Duration of training: 3 Days
  • Study mode: Full time
CIEH LEVEL 3 AWARD IN FIRE SAFETY RISK ASSESSMENT AND CONTROL
Audience aimed at: Corporate training only

COURSE OVERVIEW This Fire Safety Risk Assessment training will assist delegates in consolidating and develop their existing knowledge of workplace fire safety and, gain a thorough understanding of the formal fire risk assessment process enabling delegates to undertake their own fire risk assessment. The importance of fire safety in the workplace Principles of fire risk assessment Fire risk assessment in practice: Fire risk controls; Fire risk control measures; Assessing fire risk control measures; Application of findings Undertaking a fire risk assessment This course is designed for responsible persons in non-complex, low or normal risk premises who wish to carry out their own fire risk assessment, or those who assist them in fulfilling this duty.

  • Study level: Not applicable
  • Duration of training: 3 days
  • Study mode: Full time
180˚ Excavator - ITSSAR,RTITB, Inhouse
Audience aimed at: Corporate training only

COURSE OVERVIEW This course is designed to train and assess delegates in the safe operation of 180° Excavators, including how to safely and proficiently manoeuvre, drive and position the machine. On successful completion of this course, delegates will be able to understand current relevant legislation, identify hazards and the precautions needed to overcome them and will be able to operate safely and proficiently with minimum risk of injury and/or damage to equipment and property.

  • Study level: Multiple levels
  • Duration of training: 1 day
  • Study mode: Full time
Confined Spaces + Practical
Audience aimed at: Corporate training only

COURSE OVERVIEW On average, 15 people are killed and more seriously injured every year in the UK across a wide range of working environments in confined spaces. This happens in a variety of industries and situations, from those involved in the operation of complex plant through to accessing simple storage vessels.

  • Study level: Not applicable
  • Duration of training: 2 days
  • Study mode: Full time
Emergency First Aid
Audience aimed at: Corporate training only

COURSE OVERVIEW This Qualsafe/EFR (Emergency First Response) accredited course is aimed at those who wish to learn the basics of first aid training. EFA training will enable delegates: To provide help and give safe, prompt and effective First Aid to a casualty in the workplace following an injury or illness To act safely, promptly and effectively with emergencies at work To be familiar with the types and uses of first aid equipment To gain an appreciation of the duties of employers and the legal framework Be familiar with record keeping and management issues in connection with an emergency To recognise the importance of personal hygiene in first aid procedures COURSE CONTENT Delegates training in Emergency First Aid, will cover the following: Resuscitation (CPR) Control of bleeding Shock Treatment of unconscious casualty Communication Choking Seizures Minor Injuries Record Keeping Hazards in Work Place Use of First Aid Equipment On successful completion of this course, delegates will be awarded a Qualsafe/EFR (Emergency First Response) certificate.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
IOSH Working Safely
Audience aimed at: Corporate training only

COURSE CONTENT IOSH – Working Safely training will cover: -Introducing Working Safely – It’s not unusual for delegates coming on to the course to think that accidents only happen to ‘other people’. - Defining Hazard and Risk – Puts ‘Hazard’ and ‘Risk’ into everyday language, and uses familiar examples.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
Manual Handling Train the Trainer
Audience aimed at: Corporate training only

COURSE OVERVIEW Manual handling accidents are not confined to any particular type of work activity. Approximately 40% of all reported 3 day injuries are attributable to manual handling.

  • Study level: Not applicable
  • Duration of training: 3 days
  • Study mode: Full time
Telescopic Handler - NPORS
Audience aimed at: Corporate training only

Telescopic Handler - Inhouse, NPORS, ITSSAR, RTITB accreditations COURSE OVERVIEW Operators should be trained to an essential level of skill to work with Telescopic Handler trucks safely, efficiently and with competence. By the end of the course the operator should state the reasons for operators training, and pass a basic operatives skills test as set out in the HSE publication Rider-Operated Lift Trucks, Approved Code of Practice, (L117).

  • Duration of training: 1 day
  • Study mode: Full time
First Aid at Work Refresher
Audience aimed at: Corporate training only

COURSE OVERVIEW This course is ideal for First Aiders whose certificate is due to expire and they wish to renew it. This refresher course will enable delegates: - To provide help and give safe, prompt and effective First Aid to a casualty in the workplace following an injury or illness - To act safely, promptly and effectively with emergencies at work - To be familiar with the types and uses of first aid equipment - To gain an appreciation the duties of employers and the legal framework - Be familiar with records keeping and management issues in connection with an emergency - For course members to recognize the importance of personal hygiene in first aid procedures COURSE CONTENT The following will be covered: - Resuscitation (CPR) - The unconscious casualty - Poisoning - Responsibilities employers and employees - Managing accident - Prevention of infection - Control of wounded or bleeding casualty - Treatment of burns and scalds - Treatment of injury to fractures - Treatment of shock - Recognition and action for medical illness - Airway and breathing disorder - Use of First Aid equipment - Recovery position On successful completion students will receive an accredited Qualsafe/EFR (Emergency First Response) certificate, which is valid for 3 years.

  • Study level: Not applicable
  • Duration of training: 2 days
  • Study mode: Full time
Next