Find training courses on Training and Courses.com
> UK

British Gas Services (Commercial) Ltd training courses

18 training courses found

City & Guilds 2395 Conversion course
Audience aimed at: Corporate training only

This 1 day course is aimed at all candidates who have previously completed the City & Guilds 2394 qualification. Candidates will need to demonstrate that they have completed the 2394 course by providing a copy of their City & Guilds certificate.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
City & Guilds 2394/5 Combined Course
Audience aimed at: Corporate training only

This 5 day course is a combination of the 2394/5 training courses and will all allow candidates to complete both qualifications without attending the centre of separate occasions. The course covers the same level of content as covered in the main courses.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
City & Guilds 2394 - Award in the Initial Verification and Certification of Electrical Installations
Audience aimed at: Corporate training only

After carrying out electrical installation work it is necessary to ensure the new work meets the requirements of BS7671. An inspection and test of this work must be carried out to confirm it is safe to be put into service.

  • Study level: Advanced
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
CompEx Ex01 to Ex04
Audience aimed at: Corporate training only

CompEx is the national training and assessment scheme for electro technical crafts personnel who work in potentially explosive atmospheres, such as on and off-shore Oil and Gas Pharmaceuticals, Energy and Chemical industries. CompEx is a national joint training initiative developed and implemented by the Engineering Equipment and Material Users Association (EEMUA) and JTL and is supported by the Health and Safety Executive.

  • Study level: Not applicable
  • Duration of training: 5 Days
  • Study mode: Full time
City & Guilds 2377 Inspection and Testing of Portable Appliances
Audience aimed at: Corporate training only

Developed in line with the latest IEE Code of Practice (4th Edition), this course focuses on the formal inspection, testing and recording of electrical equipment, with special recgards for portable appliance testing. Using hands-on, practical tuition, it gives you the skills to meet typical contemporary challenges and prepares you for the City & Guilds 2377-22 examination.

  • Study level: Beginner
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
Basic Electrical
Audience aimed at: Corporate training only

It is usual in many industries to find that companies have radically streamlined their maintenance and technical workforce departments. This puts pressure on company managers to use non-electrical personnel for routine electrical duties.

  • Study level: Beginner
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
City & Guilds 2395 Periodic Inspection, Testing and Certification
Audience aimed at: Corporate training only

The Electricity at Work Regulations require electrical installations to be maintainedso as not to give rise to danger. One common method of meeting this requirement is to carry out a periodic inspection and test of an electrical installation and report on its condition.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
CompEx Ex01 to Ex 04 (Refresher)
Audience aimed at: Corporate training only

CompEx is the national training and assessment scheme for electro technical crafts personnel who work in potentially explosive atmospheres, such as on and off-shore Oil and Gas Pharmaceuticals, Energy and Chemical industries. CompEx is a national joint training initiative developed and implemented by the Engineering Equipment and Material Users Association (EEMUA) and JTL and is supported by the Health and Safety Executive.

  • Study level: Not applicable
  • Duration of training: 2 Days
  • Study mode: Full time
CompEx ExF Foundation Module
Audience aimed at: Corporate training only

CompEx is the national training and assessment scheme for electro technical crafts personnel who work in potentially explosive atmospheres, such as on and off-shore Oil and Gas Pharmaceuticals, Energy and Chemical industries. CompEx is a national joint training initiative developed and implemented by the Engineering Equipment and Material Users Association (EEMUA) and JTL and is supported by the Health and Safety Executive.

  • Study level: Not applicable
  • Duration of training: 1 Day
  • Study mode: Full time
AC Motor Principles
Audience aimed at: Corporate training only

This day focuses on the theory related to electric motors, including starting methods, wiring connections, testing anf fault-finding techniques. The course also acts as a stand alone course for delegates just requiring information relating to the motor maintenance and control, or as a 4th day to the Basic Electrical Course.

  • Study level: Beginner
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
17th Edition Wiring Regulations Update Course Amd 3 2015
Audience aimed at: Corporate training only

It is the responsibility of every contracting electrician to ensure they are fully conversant with current electrical regulations, but it is equally important that maintenance electricians and electrical managers have sound knowledge of the regulations that relate to their environments and operations. This course is primarily aimed at electrical tradespersons and electrical managers to make them aware of the changes introduced and Implications to design and Installation practices.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
Safety Pass Alliance - Core
Audience aimed at: Corporate training only

SPA Core Day This one day course aims to provide delegates with an overview of the areas of responsibility associated with health, safety and the environment and the implications of hazards and risk assessments on both the individuals and employer and how the actions of the selected parties can reduce incidents occurring. The course will be split to cover the following areas:- Module 1 Organising for Safety Module 2 The Workplace.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
Safety Pass Alliance - Food & Drink
Audience aimed at: Corporate training only

SPA Food and Drink The SPA Passport food and drink training course focuses on hygiene and food safety, specific environmental issues and health and safety practices that are associated with personnel working within the Food and Drink Industry This one day course provides specific details relating the relevant food hygiene, environmental concerns and health and safety associated with this area and the risks that are applicable if these are not met .The course assesses injury incident rates, the need for training, awareness and good personal behavior.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
City & Guilds 2382 - 17th Edition Wiring Regulations
Audience aimed at: Corporate training only

It is the responsibility of every contracting electrician to ensure they are fully conversant with current electrical electrical regulations, but it is equally important that maintenance electricians and electrical managers have sound knowledge of the regulations that relate to their environments and operations. This course is primarily aimes at electrical tradespersons and electrical managers that are preparing themselves for the City & Guilds 2382-12, 17th Edition BS7671:2008 Regulation examination.

  • Study level: Beginner
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
City & Guilds 2396 Design and Verification of Electrical Installations
Audience aimed at: Corporate training only

Whenever new installation wotk is carried out someone will have to make crucial decisions relating to the installation design. It is a legal requirement that thr person making such decisions must be competent to do so.

  • Study level: Not applicable
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
Minor Electrical Works Including Inspection and Testing Certificate
Audience aimed at: Corporate training only

This popular course is suitable for service and installation engineers or personnel from a variety of market sectors who have a legilsative requirement to complete a Minor Electrical Works Certificate following completion of 'minor works' as defined in BS7671 wiring regulations for domestic or industrial installation work. Growing deman is now placed upaon anybody performing this type of work to provide adequate certification on completion of works, in line with the current requirements of BS7671:2008/2011.

  • Study level: Beginner
  • Duration of training: Different durations are available for this course
  • Study mode: Full time
Safe Isolation of Low Voltage Systems (City and Guilds Accredited)
Audience aimed at: Corporate training only

It should enable personnel to undertake safe electrical isolation of low voltage systems / equipment as installed in domestic, light commercial and some industrial locations, for purposes of electrical or mechanical servicing \ maintenance, that may also include component replacement. Course Content: Overview and relevance of the Low voltage safety rules, reference to the statutory regulations.

  • Duration of training: 1 day
  • Study mode: Full time
Duty Holders
Audience aimed at: Corporate training only

This course is aimed at electrical personnel who have a responsibility for, or fundamental involvement with the safety of electrical systems. It enables electrical 'Duty Holders' to fully understand their responsibility as well as re-acquainting electrical personnel with BS7671 and the Electricity at Work Regulations 1989.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Full time
  • Timetable: 1 day