Find training courses on Training and Courses.com
> UK

Ppl Training Ltd training courses

73 training courses found

Certificate for Non Domestic Energy Assessing
Audience aimed at: Corporate training only

The City & Guilds Non Domestic Energy Assessor (NDEA) Training course is aimed at existing qualified Domestic Energy Assessors wishing to produce Energy Performance Certificates (EPC's) for commercial properties. Purpose of the Non Domestic Energy Assessor Training Course To give delegates the required knowledge to qualify and register as a Non Domestic Energy Assessor (NDEA).

  • Study level: Not applicable
  • Duration of training: 6 days
  • Study mode: Short full time
Level 3 Certificate For Domestic Energy Assessor (DEA) (3+1)
Audience aimed at: Corporate training only

Only accredited and suitably qualified Domestic Energy Assessors (and existing Home Inspectors) will be allowed to carry out the Energy Assessment of the 1 million plus homes which come to the market each year. All rental properties with a new tenancy, as well as sold houses in England and Wales require an Energy Performance Certificate (EPC).

  • Study level: Advanced
  • Duration of training: 4 days
  • Study mode: Short full time
Bpec Part L Energy Efficiency course
Audience aimed at: Corporate training only

The Bpec Part L Energy Efficiency training course is approved by the Energy Savings Trust, Gas Safe and the Heating and Hot Water Information Council. The content and focus of both training and the assessments is appropriate to the requirements of plumbers, gas engineers and renewable energy installers, but also satisfies compliance with Approved Document L1 (Parts A and B) of the Building Regulations.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
Installation of Photovoltaic (PV) Panels course
Audience aimed at: Corporate training only

This City & Guilds Accredited PV installation course is aimed at those involved with the installation of on-roof solar PV panels including qualified roofers and labourers. This PV installation course covers a basic introductory level to PV components, health & safety awareness, different types of roof mounting equipment, shading awareness and electrical connections.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
BPEC G59 Solar PV Systems up to 100kWp Training Course
Audience aimed at: Corporate training only

BPEC G59 Solar PV Systems up to 100kWp Training Course Overview Introduction to G59 grid connected PV systems Protection requirements W

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
City and Guilds Accredited Photovoltaic Sales and Surveyors Course
Audience aimed at: Corporate training only

Course Summary This Photovoltaic Sales and Surveyor training course will give companies and individuals the knowledge of PV in order that they can successfully survey and sell PV installations to prospective customers. As well as giving the expertise of selling and surveying PV systems, this course will also familiarise you with PV Technologies, the Feed in Tariff (FiT), understanding the Micro-generation Certification Scheme (MCS) and will also cover Building Regulations and Planning Permission.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
BPEC Accredited Solar PV Installation Training Course
Audience aimed at: Corporate training only

Who should attend? This course is aimed at people who have passed their 17th edition wiring regulations, you will be required to supply a copy of your certificate on the first day of the course. To attend this course will be Part P registered or already have the ability to work to the standard required to join a competent person’s scheme or can provide evidence of Inspection and Testing.

  • Study level: Not applicable
  • Duration of training: 3 days
  • Study mode: Short full time
MCS Quality Management System Training for Renewable Energy Installers Course
Audience aimed at: Corporate training only

Companies carrying out the installation of MCS (Microgeneration) technologies must comply with UK Building Regulations. In addition, if installations are to attract financial incentives such as Feed in Tariffs , installers and equipment must be certificated under the Microgeneration Certification Scheme (MCS) which operates under the authority of the Department of Energy and Climate Change (DECC).

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
Bpec Solid Biomass (Installer) Training Course
Audience aimed at: Corporate training only

This Bpec Biomass Installer training course is aimed at qualified heating engineers who wish to install domestic wood-based biomass heating systems, including both space heating and central heating appliances. This Bpec Biomass Installer training course incorporates both Core Solid Fuel and Biomass Heating Systems and is aimed at qualified heating engineers who wish to install domestic solid wood-based Biomass Heating Systems.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Short full time
Quality Management System Training for Green Deal Installers Course
Audience aimed at: Corporate training only

This PAS2030 training course is aimed at individuals or companies who want to become Green Deal Installers therefore are required to operate a PAS2030 compatible quality management system (QMS). The course provides a complete bespoke online QMS designed around the unique operations of your company, PAS 2030 (Green Deal) and the Green Deal Code of Practice.

  • Study level: Not applicable
  • Duration of training: 0.5 days
  • Study mode: Short full time
level 2 (Category 1) Handling ‘F’ gases and ODS substances
Audience aimed at: Corporate training only

This F-Gas course is designed for those working within the refrigeration and air-conditioning industry who need to meet the legal requirements for working with Flourinated Gases, or F-Gases, and other ozone depleting substances. The F-Gas training course is for those wishing to be covered for all four categories; leak checking, refrigerant recovery, service/maintenance, and installation.

  • Study level: Intermediate
  • Duration of training: 5 days
  • Study mode: Short full time
level 2 (Category 4) Handling ‘F’ gases and ODS substances
Audience aimed at: Corporate training only

Who should attend? Candidates who work in the refrigeration, air conditioning and heat pump sector and are required to handle fluorinated gases and ozone depleting substances. Those attending the course should have an underpinning knowledge of the theory and practical elements of vapour compression refrigeration systems and its associated equipment.

  • Study level: Intermediate
  • Duration of training: 2 days
  • Study mode: Short full time
Emergency First Aid at Work Training Course
Audience aimed at: Corporate training only

Who should attend This Emergency First Aid at work training course is aimed at individuals who work in low risk environments that present very few hazards. Employers should carry out an assessment of first aid needs to determine the number of staff required to be qualified in Emergency First Aid at Work.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
IOSH Working Safely Course
Audience aimed at: Corporate training only

Who should attend? This course is aimed at all employees and is designed to improve the safety culture within an organisation. It focuses on how individual actions contribute to health and safety in the workplace.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
IOSH Managing Safely Course
Audience aimed at: Corporate training only

Who should attend? The course is intended for line managers requiring a broad-based knowledge of health and safety and safe systems of work. It is also suitable for those who do not wish to progress to the level of professional qualification, but would benefit from attending an accredited health and safety management course.

  • Study level: Not applicable
  • Duration of training: 4 days
  • Study mode: Short full time
Accredited Legionella Management for Water Systems Course
Audience aimed at: Corporate training only

This City & Guilds accredited course is designed for the person identified within an organisation as being the nominated ‘Responsible Person’ or ‘Deputy to Responsible Person’ for control of the legionella bacteria within water systems. To provide attendees with the necessary information to enable them to understand the duties and responsibilities of the nominated ‘responsible person’ and their ‘deputy’ for the supervision, effective implementation and management of legionella risk assessments, remedial work and management of Water Systems within their buildings to comply with approved code of practise L8.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
City & Guilds Accredited Legionella Appreciation Course
Audience aimed at: Corporate training only

A City and Guilds accredited course designed for staff who are involved in the implementation of the written scheme and who are responsible for maintaining site log books. The objective is to provide students with background knowledge of legionella and to enable them to manage and implement the monitoring requirement of water systems to ensure ACOP compliance.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
City & Guilds Accredited Legionellosis - Legionella Control Within Hot and Cold Water Systems Course
Audience aimed at: Corporate training only

This Legionellosis course is designed for managers, supervisors or engineers who need an understanding of how legionella bacteria may proliferate within their hot and cold water system and how to prevent or control the bacteria. Purpose of this course The course is designed to give those who attend an overview and understanding of how to control the risk from legionella bacteria within hot and cold water systems.

  • Study level: Not applicable
  • Duration of training: 3 days
  • Study mode: Short full time
City & Guilds Accredited Disinfection of Hot and Cold Water Systems Course
Audience aimed at: Corporate training only

This City & Guilds Accredited course is designed for supervisors and operatives who need the understanding of using chlorine and silver hydrogen peroxide to disinfect hot and cold water systems. The purpose of the course is to provide participants with the technical and practical information and knowledge for them to safely disinfect a water system in accordance with the Approved Code of Practice and Guidance Document (L8) - Legionnaires’ Disease – The control of Legionella Bacteria in water systems and BS 8558 – Specification for the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages.

  • Study level: Not applicable
  • Duration of training: 1 day
  • Study mode: Short full time
City & Guilds Accredited Legionellosis - Control of Legionella oWithin Water Systems and Evaporative Coling Towers Course
Audience aimed at: Corporate training only

Who will benefit This City & Guilds accredited course is designed for managers, supervisors or engineers who need an understanding of how legionella bacteria may proliferate within their hot and cold water system and cooling towers. Purpose The course is designed to give those who attend an overview and understanding of how to control the risk from legionella bacteria within hot and cold water systems and cooling towers.

  • Study level: Not applicable
  • Duration of training: 5 days
  • Study mode: Short full time
Next