Find training courses on Training and Courses.com
> > > > UK

191 Short Electrical Engineering training courses

Refine your results
  • All courses
  • Book now
    Book and buy these courses now with confidence. We hold on to your money until the course starts. This means you can rest assured that if the course is cancelled, we will be able to process a full refund in record time. As a secure booking platform we only work with the most reliable partners.
  • More
    Customised
    These courses can be tailored to suit your requirements; whether you're a HR manager booking training and you want it held in house, or an individual who wants your tutor to teach you Spanish at your local tapas restaurant. The content is set but you can work with the course provider on the details of how it will be run.
    Corporate training
    These are courses for employees, where everything from the content to the length can be tailored to the needs of your business. Usually booked by HR managers, these courses are generally held in house or at a venue of your choice.
Inspection and Testing Courses Able Skills - Specialists in Construction Training
Audience aimed at: Corporate training only

C&G 2394 and C&G 2395 are available at Able Skills as stand-alone qualifications or as a combination option saving you a bit of time and money. These City & Guilds qualifications are aimed at practicing electricians who have not carried out inspection and testing since qualifying or who require some update of training.

  • Study level: Not applicable
  • Duration: Different durations are available for this course
  • Study mode: Short full time
City and Guilds 2382-15 17th Edition Wiring Regulations Total Electrical Training
Audience aimed at: Corporate training only

This City and Guilds 2382-15 course is seen by many throughout the electrical industry as the “must have” qualification, whether you are involved in domestic, commercial or industrial electrical installations and all electricians, electrical engineers and anyone who is involved in the installation or design of electrical systems. It is seen in the industry as a mandatory requirement showing that a thorough understanding of the 17th Edition of the Edition BS7671 Wiring Regulations has been achieved.

  • Study level: Beginner
  • Duration: 3 days
  • Study mode: Short full time
Portable Appliance Testing C&G 2377- 22 College of North West London
Audience aimed at: Corporate training only

This course is intended for either practising/qualified or competent personnel who need to be familiar with the Institute of Electrical Engineers’ Code of Practice in respect of portable appliance testing.

  • Study level: Not applicable
  • Duration: 1 day
  • Study mode: Short full time
City & Guilds 2382-12 17th Edition Wiring Regs Trade Skills 4u Ltd
Audience aimed at: Corporate training only

Every practising electrician and domestic installer needs to be up to date with the latest 17th edition wiring regs. Our 3 day course covers everything you need to know and helps attendees undertsand the regs as well as find their way around the 17th edition wiring regs book.

  • Study level: Intermediate
  • Duration: 3 days
  • Study mode: Short full time
  • Timetable: Week Days
Certificate for the Inspection and Testing of Electrical Equipment (Code and Practice for In-Service Inspection) City of Bath College
Audience aimed at: Corporate training only

This course is for qualified electricians, domestic electrical installers and technical staff required to undertake and record the inspection and testing of electrical equipment in the workplace.

  • Study level: Not applicable
  • Duration: 1 week
  • Study mode: Short full time
  • Timetable: Thu 09:00 - 17:30
LV 3 C&G 2382-12 17th EDITION ELECTRICAL WIRING REGULATIONS (3 days) run by Basingstoke College of Technology About training provider
LV 3 C&G 2382-12 17th EDITION ELECTRICAL WIRING REGULATIONS (3 days) Basingstoke College of Technology

This course is designed for electricians who need to be able to demonstrate knowledge of the IEE wiring regulations.

  • Study level: Advanced
  • Duration: 3 days
  • Study mode: Short full time
Portable Appliance Testing The Professional Training Centre

Introduction: This course covers the legal requirement for PAT Testing and does not require participants to take a City & Guilds theory examination. Course objectives/key benefits: On completion delegates will be able to undertake and record inspection and testing of electrical equipment.

  • Study level: Beginner
  • Duration: Different durations are available for this course
  • Study mode: Short full time
Electrical Installation Diploma level 3 (Evening) Leicester College

The programme involves Health and safety and working in the electrotechnical environments, Science and principles, AC/DC electrical supplies and generation, Inspection, testing and commissioning to industry standard BS7671, Fault finding and diagnostics to industry standard BS7671. This programme comprises 52 credits.

  • Study level: Advanced
  • Duration: 1 day
  • Study mode: Short full time
  • Timetable: Tuesday & Wednesday
Portable Appliance Testing Award C&G 2377-22 Uxbridge College
Audience aimed at: Corporate training only

This qualification is aimed at candidates who would like to demonstrate competence in undertaking practical inspection and testing of electrical equipment in line with the IET Code of Practice for In-Service Inspection and Testing of Electrical Equipment. Course Content Understand the statutory and non-statutory requirements relevant to the management of electrical equipment maintenance.

  • Study level: Advanced
  • Duration: 2 days
  • Study mode: Short full time
C&G 2382 BS7671 Certificate in the Requirements for Electrical Installations - 17th Edition Update Milton Keynes College

This course is designed for experienced, qualified personnel to assist them in the process of ensuring their knowledge of the I.E.

  • Study level: Not applicable
  • Duration: 4 days
  • Study mode: Short full time
17th Edition - City & Guilds 2382-12 Alpha Building Services Engineering Ltd

This course is primarily designed for practising electricians with relevant experience and other allied professionals e.g.

  • Study level: Intermediate
  • Duration: 3 days
  • Study mode: Short full time
Portable Appliance Testing - 1 Day Newcastle College

This is a basic course designed to introduce candidates to Portable Appliance Testing.

  • Study level: Not applicable
  • Duration: 1 day
  • Study mode: Short full time
Electrical Foundation Course Central Sussex College
Audience aimed at: Corporate training only

This is a one day class designed to support those who wish to attend the PAT testing course, who have little or no electrical knowledge. Covering simple electrical theory and calculation using electrical formulas.

  • Study level: Not applicable
  • Duration: Different durations are available for this course
  • Study mode: Short full time
AM2 Test Leeds College Of Building

The AM2 test covers the following sections which must be completed within the specified timings.

  • Study level: Beginner
  • Duration: 2 days
  • Study mode: Short full time
AM2 (Achievement Measurement) Pre-Test Training West Kent College

This pre-test course acts as a revision session prior to the AM2 test, and includes installation practice and electrical testing. You can pre-book a training day at the same time as your test.

  • Duration: 1 day
  • Study mode: Short full time
Electrical Installations Level 3 Award City College Plymouth

This course is suitable for practising electricians who have not carried out inspection and testing since qualifying, or who require an update of training before going on to other City & Guilds qualifications. It is also suited to those who have limited experience of initial verification.

  • Study level: Advanced
  • Duration: 4 days
  • Study mode: Short full time
  • Timetable: Various days, 8.30am - 4.30pm
PAT Testing Courses Able Skills - Specialists in Construction Training

We offer a variety of PAT testing courses at Able Skills in an attempt to cover the requirements of both experienced electricians and those with non-electrical backgrounds. We offer 2 PAT testing qualifications: C&G 2377-22: In-Service Inspection and Testing of Electrical Equipment (PAT) and 2377-32: Management Requirements for the Maintenance of Electrical Equipment.

  • Study level: Not applicable
  • Duration: Different durations are available for this course
  • Study mode: Short full time
City and Guilds 2395-01 Level 3 Award in the Periodic Inspection, Testing and Certification of Electrical Installations Total Electrical Training

The City and Guilds 2395-01 level 3 award has been developed as a direct replacement for City and Guilds 2391-10, and comprehensively covers Periodic Inspection, Testing and Certification of Electrical Installations. The award is at Level 3 and has been endorsed by SummitSkills, the Sector Skills Council for the building services engineering sector.

  • Study level: Advanced
  • Duration: 4 days
  • Study mode: Short full time
  • Timetable: Monday to Friday
AM2 Refresher and Test College of North West London
Audience aimed at: Corporate training only

AM2 Refresher is designed to prepare candidates for their AM2 Test This course is rolling on all year please call for exact start dates.

  • Study level: Not applicable
  • Duration: 5 days
  • Study mode: Short full time
LV 3 C&G AWARD IN THE PERIODIC INSPECTION, TESTING & CERTIFICATION OF ELECTRICAL INSTALLATIONS (5 days) run by Basingstoke College of Technology About training provider
LV 3 C&G AWARD IN THE PERIODIC INSPECTION, TESTING & CERTIFICATION OF ELECTRICAL INSTALLATIONS (5 days) Basingstoke College of Technology

This qualification covers the theory and practise of the inspection, testing and certification of electrical installations.

  • Study level: Advanced
  • Duration: 5 days
  • Study mode: Short full time
Next
BOOK NOW!
Electrical Engineering Training
PAT Testing Level 3 Award in the In-Service Inspection and Testing of Electrical Equipment (City & Guilds 2377-22)

DCET TRAINING

Next start: Mon 7th Sep

Cost: £343.20 per course

Location: Redruth

City & Guilds 2382-12 17th Edition Wiring Regulations Course

PREMIER TRAINING SERVICES

Next start: Mon 7th Sep

Cost: £474.00 per course

Location: Oldham

17th Edition BS7671

PRINCIPAL ELECTRICAL TRAINING

Next start: Mon 7th Sep

Cost: £435.00 per course

Location: West Bromwich

17th Edition Wiring Regulations Training Course

PPL TRAINING LTD

Next start: Tue 15th Sep

Cost: £570.00 per course

Location: York

City & Guilds (C&G) 2382-12 - 17th Edition electrical wiring regulations

TRANS-EURO

Next start: Wed 16th Sep

Cost: £546.00 per course

Location: Towcester

Certificate in Portable Appliance Testing Training Course

PPL TRAINING LTD

Next start: Thu 17th Sep

Cost: £474.00 per course

Location: York

PAT Testing 2377-12

KE TRAINING

Next start: Thu 17th Sep

Cost: £350.00 per course

Location: London

17th Edition Regulations Training Course

WATERSIDE TRAINING LTD

Next start: Mon 21st Sep

Cost: £528.00 per course

Location: St. Helens

City & Guilds (C&G) 2392-10 - Fundamental Inspection & Testing of Electrical Installations

TRANS-EURO

Next start: Mon 21st Sep

Cost: £546.00 per course

Location: Towcester

1 Day PAT Testing Course London NW2

TTS TRAINING SERVICES LTD

Next start: Tue 22nd Sep

Cost: £174.00 per course

Location: London

City & Guilds (C&G) 2377 PAT - Portable Appliance Testing

TRANS-EURO

Next start: Thu 24th Sep

Cost: £330.00 per course

Location: Towcester

Mechanical to Electrical Conversion Training Course

PPL TRAINING LTD

Next start: Mon 28th Sep

Cost: £1,272.00 per course

Location: York

2-day City & Guilds 2377-22 PAT Testing Course

PREMIER TRAINING SERVICES

Next start: Mon 28th Sep

Cost: £336.00 per course

Location: Oldham

3-day City & Guilds 2377-22 Beginners PAT & FAT Testing Course

PREMIER TRAINING SERVICES

Next start: Mon 28th Sep

Cost: £414.00 per course

Location: Oldham

17th Edition Requirements for Electrical Installations (City & Guilds 2382-15)

DCET TRAINING

Next start: Tue 29th Sep

Cost: £384.00 per course

Location: Redruth

Initial Verification/Periodic Inspection, Testing and Certification of Electrical Installations (City & Guilds 2394/2395)

DCET TRAINING

Next start: Tue 29th Sep

Cost: £895.20 per course

Location: Plymouth

Fixed PAT Testing Course

PREMIER TRAINING SERVICES

Next start: Wed 30th Sep

Cost: £78.00 per course

Location: Oldham

Jacobean Tree of Life - Crewel work embroidery

ANGLIA LEISURE LEARNING

Next start: Fri 2nd Oct

Cost: £335.00 per course

Location: Daventry

17th Edition Amendment 3 Awareness Course

PREMIER TRAINING SERVICES

Next start: Mon 5th Oct

Cost: £60.00 per course

Location: Oldham

17th Edition

BRINSWORTH ACADEMY OF ENGINEERING

Next start: Mon 5th Oct

Cost: £594.00 per course

Location: Rotherham

City & Guilds 2395 - 01 Level 3 Award in the Periodic Inspection, Testing and Certification of Electrical Installations

TRANS-EURO

Next start: Mon 5th Oct

Cost: £774.00 per course

Location: Towcester

Introduction to Home Electrics

PREMIER TRAINING SERVICES

Next start: Mon 12th Oct

Cost: £660.00 per course

Location: Oldham

Portable Appliance Testing (PAT) Training Course

WATERSIDE TRAINING LTD

Next start: Mon 19th Oct

Cost: £324.00 per course

Location: St. Helens

Electrical to Mechanical Conversion Course

PPL TRAINING LTD

Next start: Mon 26th Oct

Cost: £1,272.00 per course

Location: York

Initial Verification/Periodic Inspection, Testing and Certification of Electrical Installations (EAL 4337/4338)

DCET TRAINING

Next start: Tue 3rd Nov

Cost: £895.20 per course

Location: Plymouth

CITY & GUILDS 2377 – PORTABLE APPLIANCE TESTING (PAT) course

BRINSWORTH ACADEMY OF ENGINEERING

Next start: Wed 2nd Dec

Cost: £300.00 per course

Location: Rotherham

City and Guilds 2395-01 Periodic Inspection, Testing & Condition Reporting of Electrical Installations

TRAINING IN ELECTRICAL LTD

Cost: £594.00 per course

Location: Nottingham

Lightning Protection

TRANS-EURO

Cost: £330.00 per course

Location: Towcester